D350 Power Upgrade
Power Upgrade

D350 Power Upgrade

D200, D250 and D300 diesels unlocked to the factory D350 calibration

Available on

The 3.0-litre Ingenium six-cylinder diesel is sold in D200, D250, D300 and D350 outputs across the Defender, Range Rover, Range Rover Sport and Discovery. Nothing mechanical differs between them. The output is set by the factory calibration, and this upgrade activates the D350 calibration your engine already carries.

It's the factory calibration rather than a tune, so the engine keeps its factory behaviour and the upgrade stays in place through dealer visits and over-the-air updates. Power upgrades come bundled with Unlimited feature coding. Enter your VIN to see your exact price.

Torque limit: D200 / D250 / D300 to D350

Factory ECU torque-limiter values by engine speed, before and after the upgrade.

Your engine
Engine speed (rpm)D200 · NmD250 · NmD300 · NmD350 · Nm
1000408408408416
1250501.7576601624
1500505575.5655728
1750505.7575655728
2000507.3574.5655728
2250504.6574655728
2500501.2573.5655728
2750484.6573641728
3000456.4553.4627728
3250432.7526.3606717.6
3500408.1499.3585707.2
3750377.6460553.5672.9
4000343430522638.6
4250331.4392.5483.9588.6
4500291355445.8538.7
4800263310400416

Internal control limits from the engine calibration, not dyno results. Delivered torque depends on conditions.

Common questions

Is this a tune or a flash?

Neither. Your engine control module already contains the higher-output calibration from the factory. We don't write a new map or modify any software. We activate the calibration that's already there, the same way JLR does when they build the D350 version of your car.

Is it safe for my engine?

Yes. The D200, D250, D300 and D350 use the same engine with the same internals. JLR built the hardware to run the highest output and set the lower ones in software. You're running the engine at an output it was designed, tested and warranted for.

Does it affect my warranty?

No software is altered, so there's nothing for a dealer to detect or flag. The car runs a the factory calibration on factory hardware. We've done this on well over a thousand vehicles and have never had a warranty issue reported back to us.

Will a dealer visit or an over-the-air update undo it?

No. Because the calibration is a factory setting rather than a patch, service visits and software updates leave it in place.

Can I go back to stock?

Yes, at any time. The original calibration is never removed, so switching back is the same process in reverse.

Can I buy the power upgrade on its own?

Power upgrades come bundled with Unlimited feature coding, since it's the same activation. Your VIN result shows the combined price.

Is this available on your car?
Enter your VIN for your exact list of activations and your price.
Check my VIN
Where’s my VIN?
  • Lower corner of the windshield, driver’s side
  • Sticker inside the driver’s door jamb
  • Insurance card or registration
  • The InControl / Land Rover app, under vehicle details
  • Or text us a photo of your registration